The GeForce 9400 GT can upgrade a computer for better PC gaming performance.
The GeForce 9400 GT is a video card for personal computers made with a graphics chip designed by NVIDIA. Installing a GeForce 9400 GT can allow a PC to have better gaming or multimedia performance. Installing this card is relatively simple, and can be done by almost anyone, regardless of prior computer hardware experience.
Instructions
1. Open the side panel of the case by removing the screws holding it in place. Slide the panel either toward the rear of the case or up, depending on the type of computer, to remove the panel. Thread the screws back into the holes they were in to ensure they aren't misplaced.
2. Locate the PCI Express card slot that the GeForce 9400 GT will be installed in. The card slot is usually located directly underneath the CPU. Use the canned air to thoroughly clean the slot until no visible dust remains on or near it.
3. Guide the GeForce 9400 GT directly into the PCI Express card slot, gently pressing the card inward evenly over the space of the slot. The card should go in with little resistance. Ensure the card is properly set by visually inspecting the slot and checking for any exposed metal pins.
4. Secure the card to the case by screwing it into the slot panel located in the back of the computer. Remove the side panel screws and install the panel back into place. Secure the panel by tightening the screws. Hook the monitor up to the new GeForce 9400 GT using either the DVI or VGA connection, depending on the monitor type.
Tags: GeForce 9400, card slot, back into, better gaming, Express card, Express card slot